XP-8xx7-CE6 series (XP-8047-CE6/8347-CE6/8747-CE6 & XP-8047-CE6-PRO/8347-CE6-PRO/8747-CE6-PRO) is the new generation ISaGRAF PAC of ICP DAS. It is equipped with an AMD LX 800 CPU (500 MHz) running a Windows Embedded CE 6.0 operating system, various connectivity including VGA resolution: max. 1600 x 1200, USB2.0: 2, Ethernet: 10/100 Mbps x 2, RS-232/RS-485: 4 or 5, and 3/7 slots for high performance parallel-type I/O modules (high profile I-8K series) and serial-type I/O modules (high profile I-87K series), etc. The Professional OS version XPAC XP-8xx7-CE6-PRO provides built-in Internet Explorer Software.
Major advantage compared with the WP-8xx7 and VP-2xW7 : ‧ The USB-mouse operations and Ethernet communication of the XP-8xx7-CE6 are more effective (consume less CPU loading) than the WP-8xx7 and VP-2xW7. ‧ The memory size (Flash and SDRAM) of the XP-8xx7-CE6 is much more than the WP-8xx7 and VP-2xW7.
The XPAC Series XP-8xx7-CE6 supports ISaGRAF Ver. 3 Workbench: ‧ IEC 61131-3 Standard Open PLC Programming Languages (LD, FBD, SFC, ST, IL, FC) + Flow Chart (FC) ‧ Auto-Scan I/O ‧ On-Line Debugging/Control/Monitoring, Off-Line Simulation ‧ Simple Graphic HMI
Software features:
Windows Compact Edition 6.0
.NET Compact Framework 3.5
ISaGRAF Ver.3 SoftLogic Inside
Support IEC 61131-3 Standard
Support Web HMI function
Accepts max. 2 MB ISaGRAF code size
XP-8xx7-CE6-PRO built-in Internet Explorer software
Hardware features:
AMD LX 800 CPU (32-bit and 500 MHz)
More Effective USB & Ethernet than WP-8xx7
512 MB DDR SDRAM, 4 GB Built-In Flash
Battery Backup SRAM: 512 KB
System Rescue CF Card (Disaster Recovery System)
0/3/7 I/O Expansion Slots (support High Profile I/O Modules)
ISaGRAF Version 3 : IEC 61131-3 standard. Languages: LD, ST, FBD, SFC, IL and FC
It supports Soft-GRAF HMI in the XP-8xx7-CE6, WP-8xx7 and VP-2xW7 PAC.
Max. Code Size
Accepts max. 2 MB ISaGRAF code size
Non-ISaGRAF
Options: Microsoft EVC++4.0 or VS .NET 2003/2005/2008 (VB .NET 2003/2005/2008, C# .NET 2003/2005/2008) with .Net Compact Framework 3.5
Web Service
Web HMI
Support Web HMI function, PC running Internet Explorer can access to the XP-8xx7-CE6 via Local Ethernet, Internet or dial Modem to monitoring and control.
Security
Web HMI supports three levels user name and password protection (high/middle/low)
Power Supply
Input Range
+10 ~ +30 VDC (unregulated),
Isolated
1 kV
Redundant Power Inputs
Yes, with one power relay (1 A @ 24 VDC) for alarm
Capacity
1.8 A, 5 V supply to CPU
and backplane; total 8 W
1.8 A, 5 V supply to CPU and backplane; 5.2 A, 5 V supply to I/O expansion slots, total 35 W
2.0 A, 5 V supply to CPU and backplane; 5.0 A, 5 V supply to I/O expansion slots, total 35 W
Power Consumption
14.4 W (0.6 A @ 24 VDC);
14.4 W (0.6 A @ 24 VDC);
16.8 W (0.7 A @ 24 VDC);
General Environment
Temperature
Operating: -25 ~
+75 °C,
Storage : -30 ~
+85 °C
Humidity
5 ~ 90 % RH (non-condensing )
System
CPU
AMD LX 800 (32-bit and 500 MHz) processor or compatible
Dual Watchdog Timers
Yes
RTC (Real Time Clock)
Provide second, minute, hour, date, day of week, month, year
System Memory
512 MB DDR SDRAM
Dual Battery Backup SRAM
512 KB (for 5 years data retention while power off)
FLASH
4 GB as IDE Master
EEPROM
16 KB, Data retention: 40 years. 1,000,000 erase/write cycles
CF Card
1 GB (support up to 32 GB)
Hardware Serial Number
Yes,64-bit hardware unique serial number
Rotary Switch
Yes (0~9)
DIP Switch
-
Yes (8 bits DIP Switch)
NET ID
1 ~ 255, User-assigned by software
VGA and Communication Interface
VGA Port
Yes (resolution: 1600 x 1200, 1024 x 768, 800 x 600, 640 x 480)
USB 2.0
2
Ethernet
RJ-45 x 2, 10/100 Base-TX (Auto-negotiating, Auto MDI/MDI-X, LED indicators)
Please use NS-205/NS-208 Industrial Ethernet Switch.
COM1
RS-232 (RxD, TxD, and GND);
Non-Isolated;
Internal communication with the I-87K High Profile modules in slots
COM2
RS-232 (RxD, TxD, and GND); Non-Isolated; Baudrate: Max. 115200 bps
8-ch. max. 250 Hz max. For Off=2 and On=2 ms . Output square wave: Off: 2 ~ 32766 ms, On: 2 ~ 32766 ms.
Optional DO Boards: I-8037W, 8041W, 8041AW, 8042W, 8050W, 8054W, 8055W, 8056W, 8057W, 8060W, 8063W, 8064W, 8068W, 8069W. (Relay Output boards cannot generate fast square wave)
Counter, Encoder, Frequency
Parallel DI Counter
8-ch. max. For 1 controller. Counter val: 32-bit. 250 Hz max. Min. ON and OFF width must be more than 2 ms.
Optional DI boards: I-8040W, 8040PW, 8042W, 8046W, 8048W, 8050W, 8051W, 8052W, 8053W, 8053PW, 8054W, 8055W, 8058W, 8063W.
I-8093W: 3-axis Encoder Module, max. 1M Hz for quadrant input mode, max. 4M Hz for
pulse/direction and cw/ccw input mode. (FAQ-112)
I-8084W: 250 kHz max., 4-ch encoder, can be pulse/direction, or Up/Down or A/B phase
(Quad. mode); Not support Encoder Z-index. (FAQ-100)
Max. 33 COM Ports (COM1~ 5 and COM6 ~ COM33 if multi-serial port boards are plugged in Slot 1~7) can support multi-ports of Modbus RTU/ASCII Master protocol to connect to other Modbus Slave devices. (XP-8347-CE6/8747-CE6's COM1 is for internal communication with I-87K modules in slots only.)
Modbus TCP/IP Master
Protocol
Link to max. 100 devices that support Standard Modbus TCP/IP Slave protocol (FAQ-113)
Modbus RTU Slave
Protocol
Max. 9 COM Ports (COM1 ~ 33) can support Modbus RTU Slave protocol for connecting ISaGRAF, PC/HMI/OPC Server and HMI panels. (XP-8347-CE6/8747-CE6's COM1 is for internal communication with I-87K modules in slots only.)
Modbus TCP/IP Slave
Protocol
2 Ethernet Ports all support Modbus TCP/IP Slave protocol for connecting ISaGRAF and PC/HMI. 2 Ports support up to 64 connections. (If PAC uses 1 connection to connect each PC/HMI, it can connect up to 64 PC/HMI; If PAC uses 2 connections to connect each PC/HMI, it can connect up to 32 PC/HMI; ...) When one Ethernet port is broken, the other one can still connect to PC/HMI.
Web HMI Protocol
Ethernet port for connecting PC running Internet Explorer.
I-7000 and I-87K
RS-485
Remote I/O
One of COM3, COM4 supports I-7000 I/O modules, I-87K base + I-87K Serial I/O boards and
RU-87P1/2/4/8 + I-87K High Profile I/O boards as Remote I/O. Max. 255 pcs. of I-7000/87K Remote I/O modules for one PAC.
M-7000 Series Modbus I/O
Max. 33 RS-485 ports (COM1 ~ 5 and COM6 ~ COM33 if multi-serial port boards are plugged in) can support M-7000 series Modbus I/O. Each port can connect up to 32 M-7000 Modules.
(XP-8347-CE6/8747-CE6's COM1 is for internal communication with I-87K modules in slots only.)
Modbus TCP/IP I/O
LAN2 supports ICP DAS Ethernet I/O : I-8KE4-MTCP and I-8KE8-MTCP listed at www.icpdas.com > FAQ > Software > ISaGRAF Ver.3 (English) FAQ-042. If LAN2 is broken, it will switch to LAN1 automatically to continuously work. (This need LAN1 and LAN2's IP are set in the same IP domain)
FRnet I/O
Support max. 7 pcs. I-8172W boards in slot 1 ~ 7 to connect to FRnet I/O modules, like FR-2053, FR-2057 FR-32R, FR-32P, at www.icpdas.com > FAQ > Software > ISaGRAF Ver.3 (English) FAQ-048. Each I-8172W board can connect up to 256 DI plus 256 DO channels.
Send Email
Supports mail_snd and mail_set functions to send email with one attached file via Ethernet port.
Ebus
To exchange data between ICP DAS's ISaGRAF Ethernet controllers via Ethernet port.
(LAN2 Port only)
SMS:
Short Message Service
COM4 or COM5 can link to a GSM Modem to support SMS. User can request data/control the controller by cellular phone. The controller can also send data and alarms to user's cellular phone.
Optional GSM Modems: GTM-201-RS232 (850/900/1800/1900 GSM/GPRS External Modem)
User-defined Protocol
User can write his own protocol applied at COM1 ~ COM5 and COM6 ~ COM33 (if multi-serial port boards are plugged in) by Serial communication function blocks. (XP-8347-CE6/8747-CE6's COM1 is for internal communication with I-87K modules in slots only.)
MMICON/LCD
COM4 or COM5 supports ICP DAS's MMICON. The MMICON is featured with a 240 x 64 dot LCD and
a 4 x 4 Keyboard to display picture, string, integer, float, and input a char, string, integer and float.
product is available
Compact
Unit based
WinPAC (WinCE)
XP-8000 – Quick and Effective
Windows Compact Edition 6.0
