NS-205PFCS CR

The NS-205PF/NSM-205PF is a 4-port unmanaged PoE (PSE) with 1 fiber port switch; it supports 4 PoE ports which are classified as power source equipments (PSE). The NS-205PF/NSM-205PF makes centralized power supply come true and provides up to 15.4 watts of power per PSE port. Using fiber optics, you can prevent noise from interfering with your system and supports high-speed (100 Mbps) and highdistance (up to 60 km) transmissions.

Features:

Provides 1 x 100-FX fiber port plus 4 x PoE ports Automatic MDI/MDI-X crossover for plug-and-play Each port supports both 10/100Mbps speed auto negotiation Store-and-forward architecture Full duplex IEEE 802.3x and half duplex backpressure flow control 4 PoE ports with Power Sourcing Equipment (PSE) operation Auto-detection of PD (powered devices) and automatic power management Over-temperature, over-current and over/under-voltage detection Power Input, +46 ~ +55 VDC Supports operating temperatures from –30 ~ +75°C DIN-Rail

Product specification
Technology
Standards	IEEE 802.3, 802.3u, 802.3x ,802.3af (Power over Ethernet)
Processing Type	Store and forward, wire speed switching
MAC Addresses	1024
Memory Bandwidth	3.2 Gbps
Frame Buffer Memory	512 Kbit
Flow Control	IEEE802.3x flow control, back pressure flow control
Interface
RJ-45 Ports	10/100 Base-T(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection
LED Indicators	Power, Link/Act , 10/100M, Power Device is detected
Ethernet Isolation	1500 Vrms 1 minute
+/-4 kV ESD Protection	Yes
Fiber Interface (100 Base-FX SC/ST type)
Multi-Mode (NS-205PFT/FCNSM-205PFT/FC)	Multi mode fiber cables:50/125, 62.5/125 or 100/140 m Distance :2 km, (62.5/125 m recommended) for full duplex Wavelength : 1300 or 1310nm Min. TX Output:- 20 dBm Max. TX Output: -14 dBm Max. RX Sensitivity: -32 dBm Max. RX Overload: -8 dBm Budget: 12 dBm
Single-Mode (NS-205PFCSNSM-205PFCS)	Single-mode fiber cables: 8.3/125, 8.7/125, 9/125 or 10/125m Distance: 30 Km, (9/125 m recommended) for full duplex Wavelength: 1300 or 1310nm Min. TX Output: - 15 dBm Max. TX Output: -8 dBm Max. RX Sensitivity: -34 dBm Max. RX Overload: -5 dBm Budget: 19 dBm
Single-Mode (NS-205PFCS-60NSM-205PFCS-60)	Single-mode fiber cables: 8.3/125, 8.7/125, 9/125 or 10/125m Distance: 60 Km, (9/125 m recommended) for full duplex Wavelength: 1300 or 1310nm Min. TX Output: - 5 dBm Max. TX Output: 0 dBm Max. RX Sensitivity: -35 dBm Max. RX Overload: -5 dBm Budget: 30 dBm
Power Input
Input Voltage Range	+46 ~ +55 VDC for PoE output
Power Consumption	0.08 A@ 48 VDC without PD loading 1.5 A@ 48 VDC with PD full loading
Protection	Power reverse polarity protection
+/-4 kV ESD Protection	Yes
Connection	3-Pin Removable Terminal Block
PoE Technology
PoE Compliance	100% IEEE 802.3af compliant
PoE Classification	PSE (Power Sourcing Equipment)
PoE Voltage	+48 VDC depending on power input
PoE Power	Up to 15.4 watts per channel
PoE Operation	Automatic detection and power management
PoE Pin assignments	V+ (Pin 1,2), V- (Pin 3,6)
PoE disconnect mode	DC disconnect
Mechanical
Casing	Plastic (Flammability UL 94V-0)
Dimensions (W x L x H)	31 mm x 157 mm x 113 mm
Installation	DIN-Rail
Environmental
Operating Temperature	-30 C ~ +75 C
Storage Temperature	-40 C ~ +85 C
Ambient Relative Humidity	10% ~ 90% RH, non-condensing

Product features:
Industrial module
Industrial Ethernet Devices
Industrial Ethernet
Manufacturer	ICPDAS
Interfaces	Ethernet Optic fiber
Ethernet device type	Switch Unmanaged switch
Network interfaces	10/100 TX 100Mb FX
Network connector	ST SC
Number of network ports	Up to 8
Accessory type	Connector
Accessory type	Connector
Switch features	Single mode